Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Bear, DE

Patio Cleaning for Pavers in Bear, DE

Pressure wash with a surface cleaner for pavers. Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material. Typical cost $150-$400.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Patio Cleaning for Pavers in Bear, DE brings it back, usually in a single visit. On pavers, the method we use is pressure wash with a surface cleaner.

How we clean it

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Caring for pavers

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

Signs you need patio cleaning for pavers

  • Green or black growth between pavers or on shaded concrete
  • Grease spots near the grill
  • Stains from planters, leaves and furniture
  • Weeds in the joints
  • White chalky haze on pavers or stone

What causes the dirt and stains

  • Shade and damp soil around the patio
  • Cooking grease and food spills
  • Rust from metal furniture and planters
  • Efflorescence (salts) rising out of masonry

Easy upkeep between cleanings

  • Move planters now and then so they don't leave rings
  • Clean grill grease quickly with dish soap and hot water
  • Pull weeds from joints before they spread
  • Sweep often so leaves don't stain

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Blowing joint sand out of pavers
  • Etching or pitting soft stone like travertine and sandstone
  • Acid cleaners on limestone and travertine
  • Stripping an existing sealer unevenly

What happens on the day

  1. Check the patio material and any sealer
  2. Move furniture and protect nearby plants
  3. Pre-treat growth, grease and stains
  4. Clean with the right pressure and tools
  5. Rinse, re-sand joints if needed, and walk the patio with you

Patio Cleaning for Pavers cost in Bear, DE

$150-$400Typical range for a typical backyard patio
1-2 hoursTypical time on site
Once a year, more often in shadeRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Serving Bear, DE and nearby towns

In Delaware, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

Besides Bear (ZIP code 19701), we handle patio cleaning for pavers in Brookside (4.5 mi), Glasgow (4.9 mi), New Castle (5.5 mi) and Wilmington Manor (5.6 mi). Call (555) 010-0000 for a free quote in Bear.

Patio Cleaning for Pavers: frequently asked questions

How much does patio cleaning for pavers cost in Bear, DE?

Patio Cleaning for Pavers typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for patio cleaning for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is patio cleaning for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule patio cleaning for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Bear, DE

House Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$700

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Pressure Washing for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$600

Roof Cleaning for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $400-$1,000

Graffiti Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$800

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Pressure Washing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$600

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Garage Floor Cleaning

Garage floor degreasing and pressure washing to lift oil, tire marks and road salt residue.

Typical $100-$300

Pool Deck Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$500

Parking Lot & Garage Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $500-$3,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Bear, DE. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote